Quick and simple guide on how to understand relative bearings!
Other ATLAS Guides:
While most ship navigations do not follow negative bearings, for the simplicity of this game, this guide will follow the bearings provided in-game.
This is what the bearings look like in game:
You should use this method when the ship you are spotting is far away as simple callouts are not enough to give a precise callout.
What are relative bearings used for?
Relative bearings are used to precisely “callout” ships, islands, … and mosters. This method of calling out is used to give information to your crew.
You may use other types of callouts like clock position or cardinal directions but relative bearings are more precise when referring to long-range targets.
How to use it
To use these bearings, you have to surround the ship with the bearings:
The nose of the ship is 0 and the back of the ship is 180.
When opening your bearings to remember the bearings, make sure to look at the nose of your ship. The bearing 0 should be alligned with the nose of your ship.
It is important to callout from the perspective of the “captain” to prevent innacuracies. In other words, the wheel/helm:
Performing the callout
*Keep note that the following pictures are not in scale and the ships should be interpreted as if they were within long distances from each other.
In the picture above, the bearing to callout would be “between 112.5 and 135”. You may also say 112.5 for the simplicity of it.
This bearings in the picture above is 67.5