Home > Desynced > Desynced Power Transmitter Targeting Display

Desynced Power Transmitter Targeting Display

Desynced Power Transmitter Targeting Display

A super easy method to show what unit a transmitter is powering.

The Problem

It is very hard to know what unit a power transmitter is sending power to once you have set one up, and you have lots of transmitters.

Power Transmitter Targeting Display

Solution

All you need to do is drag the transmitter target register into the building’s “store” register. This will send any items in the building into the unit, so I recommend making dedicated transmitter buildings that don’t use their storage. The 1×1 Medium slot building is the cheapest medium slot available.

Power Transmitter Targeting Display

Now, you should be able to see the line tracing the transmitter to the unit it is powering. If you cannot, cycle through the register display modes, the default key being TAB.

Power Transmitter Targeting Display
Power Transmitter Targeting Display
See also:  Desynced Radio Mining Guide
Written by StellarMeme

Leave a Comment