Mount & Blade II Bannerlord Cheats & Console Commands (Dev Console)

Mount & Blade 2 Bannerlord Cheats & Console Commands

There are many older codes and players try to enter console in-game using Ctrl +`. But there is no cheat menu yet. You can only use developer console. Follow the steps below and activate the cheat mode (developer console).

Other Mount & Blade II Bannerlord Guides:

Note: Steam achievements become disabled when you enable cheats in the launcher.

Mount & Blade II Bannerlord Cheats

How to Enable Developer Console (Cheat Mode)

  • Go to Documents\Mount and Blade II Bannerlord\Configs
  • Open “engine_config.txt”
  • Look for “cheat_mode = 0” and change the value to “1”

Once you have complete steps above and activate developer console, you can use only the following 8 commands after starting a new campaign.

  • Ctrl + Left Click – Teleports you to the selected location on the world map.
  • Ctrl + H – Fully heals you.
  • Ctrl + Shift + H – Fully heals your horse.
  • Ctrl + F4 – Knocks an enemy unconscious.
  • Ctrl + Shift + F4 – Knocks all enemies unconscious.
  • Ctrl + F2 – Knocks out one of your own soldiers.
  • Ctrl + F3 – Knocks out the player.
  • Ctrl + Shift + F3 – Knocks your horse unconscious.

Note: You need to start a new campaign after activating the cheat mode (developer console). Otherwise the cheats will not work. (old info)

You do not have to start a new story to use the cheats. I’ve used cheated on my loads from before activating them and after without any issues at all. (ty Robert)

from Geogie Further note on using cheatmode: You have complete access to all the items in the world in an unlimited quantity. Once you activate it in the config file you can load the game, then open your inventory. On the left side of it, where there are normally pickup items or it’s simply empty, you will see all items the game has. That means armor, weapons, goods, horses etc.

I sure many already noticed. It kinda spoils the game though, but it helps with the money problem and also lots of quests (give me goods quests). Useful to compare various armors, weapons and horses to see what is best.

P.S: game can be normally played, it shows only when you are not buying or picking anything (after battle for example)

Mount & Blade 2 Bannerlord Cheats

CheatEffect
Ctrl + XPressing the buttons in the inventory screen will provide you with 1,000 Thaler.
Ctrl + XDo the button combination on the character screen to receive 1,000 XP.
Ctrl + LYou need to do the button combination on the character screen to level up faster.
Ctrl + WPerforming the button combination on the character screen will increase the proficiency of all the weapons at your disposal.
Ctrl + XUse the combination on the party screen in order to upgrade your selected units.
Ctrl + TYou need to do the code on the map screen in order to reveal everything on the map. Do note that the code won’t reveal hideouts.
Ctrl + LMBYou can teleport your party by using the code on the map screen.
Ctrl + LMBThis must be done during a battle to upgrade a unit.
Ctrl + HYou need to perform the combination during a battle in order to restore your HP.
Ctrl + Shift + HYou need to perform the combination during a battle in order to restore your horse’s HP.
Ctrl + F3You need to perform the combination during a battle in order to harm yourself.
Ctrl + Shift + F4You need to perform the combination during a battle in order to knock a random enemy out on the battlefield.
Ctrl + Alt + F4You need to perform the combination during a battle in order to knock all enemies out on the battlefield.
Ctrl + Shift + F4Enemies which are zoomed in are knocked out.
Ctrl + F5Performing the combination during battles will enable AI to control your character.
Ctrl + F6You can knock a single ally.
Ctrl + F9Use the combination to toggle slow motion on/off.

It’s end. I hope “Mount & Blade 2 Bannerlord Cheats & Console Commands” helps you. Feel free to contribute the topic. If you have also comments or suggestions, comment us.

More of this sort of thing:



44 thoughts on “Mount & Blade II Bannerlord Cheats & Console Commands (Dev Console)

  1. Jayve_yt Reply

    It doesn’t work for me for some reason i hit Ctrl + ~ but nothing appears the only thing that hapens after i change cheat mode to 1 is a list of all items on the left in my inventory anyone know how to fix this?

  2. Zay Hardison Reply

    how do you press ~ without press ` I don’t understand i press the ctrl +` but it does’t work

  3. Jared Reply

    I followed all steps and when pressing CTRL + ~ no cheat menu or command appears? please could you help with this. Thank you.

    • Ybot Post authorReply

      There is no cheat menu for now. But you can use developer console.

      Go to Documents\Mount and Blade II Bannerlord\Configs
      Open “engine_config.txt”
      Look for “cheat_mode = 0” and change the value to “1”

      Once you have complete steps above and activate developer console, you can use only the following 4 commands after starting a new campaign.

      Ctrl+Left Click – Teleports you to the selected location on the world map.
      Ctrl+H – Fully heals you.
      CTRL+Shift+H – Fully heals your horse.
      Ctrl+F4 – Knocks an enemy unconscious.

      Note: You need to start a new campaign after activating the cheat mode (developer console). Otherwise the cheats will not work.

  4. Ultimate Reply

    So changing it from 0 to 1 worked but the actual cheat menu won’t open and many codeds such as CTRL +X arent working.

    • Leonardo Reply

      I change the value of “cheat mode” to 1. But when I use the dev console and write something it say “cheat mode disabled”

  5. Winterborn Reply

    but… it hasn’t even been a day yet. Thanks, it works for me with a new campaign. Enable cheat mode then start a new campaign. Now you can use this commands:

    Ctrl+Left Click – Teleports you to the selected location on the world map.
    Ctrl+H – Fully heals you.
    CTRL+Shift+H – Fully heals your horse.
    Ctrl+F4 – Knocks an enemy unconscious.

    • Nurr Reply

      No cheats except the 4 mentioned if you start a new game work at all l. Not sure if this is intentional by devs or of the commands are wrong or somehow disabled

  6. Buschrolle Reply

    The only thing that works is Teleport and heal, also after starting a new game.

    • Ybot Post authorReply

      + Check this again our post.
      CTRL+Shift+H – Fully heals your horse.
      Ctrl+F4 – Knocks an enemy unconscious.

  7. Dragon’sScale Reply

    The CTRL + X (for all tabs) and CTRL + L (for character menu) Do not work. All other cheats (from what I can see for now) do work. I would like to level up my horseman skill faster but cannot because CTRL + X doesn’t work. Any suggestions?

  8. Aramayis Sahakian Reply

    I have tried it and it works

    Also I did not had to start a new campaign

  9. JR Reply

    So, am I to understand the money, exp cheats…Don’t work? I did everything listed, changed the config febug from 0 to 1. teleport works, and im assuming healing does too. but no matter what screen Im on the money and XP doesn’t. Cheers

    • Geogie Reply

      Further note on using cheatmode: you have complete access to all the items in the world in an unlimited quantity. Once you activate it in the config file you can load the game, then open your inventory. On the left side of it, where there are normally pickup items or it’s simply empty, you will see all items the game has. That means armor, weapons, goods, horses etc.

      I sure many already noticed. It kinda spoils the game though, but it helps with the money problem and also lots of quests (give me goods quests). Useful to compare various armors, weapons and horses to see what is best.

      P.S: game can be normally played, it shows only when you are not buying or picking anything (after battle for example)

      Just my two cents.

  10. Jason Reply

    So basically there is no console when you use Ctrl (+) ~
    All that is left are the 4 cheats , Heal yourself , Heal your horse , Teleport and Knock enemies out
    Too bad , its not like tale worlds to deny users from using the cheats
    They had no problems with cheats in M&B and Warband

  11. Chamo Reply

    Little hint, if you activate the cheat code’s via the the path, you will get all items on the left side in the inventory,
    get them all in your inventory , drag maybe some amor and weapons you like and sell them all to merchants to get money… ^^

    after you have sell these items , they never ever appear on the left side

  12. Archangel Reply

    I change it from 0 to 1 but when I launch the game and try the cheats they don’t work I close the game and I look into the folder it goes back to a 0

    • Ybot Post authorReply

      Steam files are being refreshed, so I’ll ask you to try again because it worked fine on me too.

  13. John Tillis Reply

    I dont have a config folder and cant find the file for the cheats. Whats up with that?

  14. Yanci Reply

    John, check your antivirus, by me it was blocking creation of this files right after the game was started.

  15. David Reply

    I did a new campaign with the changes to the config file and only the 4 cheats works.
    the ctrl + X does not work. I double checked the config file and it is set to 1. Any ideas

  16. Brendan Reply

    Why is there a command list that does not work? Like the CTRL+ X and L.

    Majority Don’t Work.

  17. Vladimir Reply

    In order to access the console commands with ctrl ~ in game you need a mod from nexus.You can install it with vortex mod manager easily enough. The mod in nexus is called Developer Console. Install it with vortex or manually and start the game.On the start up menu where you choose between singleplayer and multiplayer click mods and enable developer console. Then when your in game press ctrl ~ and the developer console should pop up. Also note you can find the codes for developer console by just looking them up on google with mount and blade 2 bannerlord console commands. Also you may want to have cheats enabled as well as cheats work hand in hand with the developer console so it would be better to have them enabled, although I am not sure if they are required. Hope this Helps!

  18. Tim Reply

    with such a buggy game where you have to start all over again after an update there should be more cheat options

  19. Steve Richmond Reply

    the Console mod still works you just need it to be placed in modules in the game dir and then in game you click on CTRL + ALT + ~ to open the console

    Then write campaign. and it will complete all available options for you

  20. David Webb Reply

    The complete_active_quest is no longer in the console as an option.

  21. Kevin Martin Reply

    all cheat work but ctrl+f5 dont work… My character just dont move!

  22. Dareus Reply

    After placing 1 at engine_config and moving it to read only, starting new campaign several times.. the e1.4.2 console say “cheat mode disabled”.
    Any suggestions ppl?

Leave a Reply

Your email address will not be published. Required fields are marked *