Steam Engine Simulator How to Get Up To 4684 RPM in SES

This is a guide on how to get the fastest RPM you can achieve.

Steam Engine Simulator How to Get Up To 4684 RPM in SES

Getting To “HELL” mode

• Open the game as usual
• Spam click on the A icon on the bottom right corner until your whole game changes color and visual
• You are now in hell mode

Getting The Engine Started and Choosing the best options

• Press H to bring up the Information tab (and C if you need it)
• Hold N and use your scroll wheel to reduce the Quality to the lowest possible option (11.1%)
• Set the throttle to 59%
• Set the heat to 100%
• Open the water valve and build up pressure
• Get the engine started by any means

Getting to the top RPM

• Now that you got your engine started lets get that top RPM
• Slowly reduce the water valve until your water starts to go down
• You can see the temperature slowly going up
• When the temperature gets to 300 C slowly start opening the water valve (DO NOT let the temperature go down under 300/max)(if you do accidentally let the temperature go below 300 just reduce the water valve
• Now that it is increasing RPM slowly increase the water valve using Shift+drag (DON’T go too fast on increasing your water valve because when you do your temp goes down and your Pressure goes down and that’s not good)
• There you go you have gotten the top RPM

Closure

It is going to take a lot of patience to slowly increase your water valve but you’ll get there.

*Disclaimer: I currently do not know what is the top Speed you can achieve in SES , my current top speed as of writing this is 4684 RPM i will update my top speed if i do achieve a higher RPM.